Attempting to calibrate RELCO Starter against 12V Compact Fluorescent Lamp in order to work out the wavelengths of the main lines on RELCO spectrum

Today, I have had a go at calibrating the homemade RELCO Starter bulb calibration lamp I made against 12V compact fluorescent lamp bulb in order to determine the wavelengths of the main lines on the CCDSPEC spectrum of the RELCO bulb.

Download calibration files from analysis by clicking on link below – calibration files RELCO vs CFL CCDSPEC no telescope 30/9/2018:

Spectrum RELCO Starter on CCDSPEC without telescope 300918

Also look at https://stargazerslounge.com/topic/226911-neon-lamp-to-set-spectroscope/?tab=comments#comment-3521335 to find out what happened when I tried to compare the lines I identified below with the atlas of lines from http://www.ursusmajor.ch/downloads/sques-relco-sc480-calibration-lines-5.0.pdf – sadly they don’t seem to match!

Andy

RELCO Starter Bulb spectrum taken with CCDSPEC Spectrometer (below):

Spectrum of compact fluorescent light bulb taken with CCDSPEC (below):

Graphing both above spectra together:

Calibrating spectra of both RELCO and CFL using above two lines in RSPEC gives following calibrated spectra:

The following is my final labelled image showing main lines on RELCO starter bulb spectrum (below):

Leave a Reply