Eq6 rail mod .

Xmas goodie, overcomes the steel adjustment bolt versus Aluminium mount problem. Shouldn’t be much of a problem if folk supported the weight of the mount whilst adjusting the altitude to get polar aligned. However , eventually the adjustment bolt will begin to make its slippable groove into the mount head. Modern Astronomy used to sell a cumbersome and well overengineered fix.

The rail mod is much cheaper at about £130 and very easy to fix. Takes about 15 minutes , including time to gather a 16mm wrench and spanner.

Heres what you get ,

It’s beautifully made and you get a choice of self adhesive side plates. First job is to remove the existing glued on ones.. I ended up using a soldering iron to melt my way through. Make sure that you’ve marked your zero on the alt. Cover. Loosen the 16mm bolt on this side at the same time as loosening the holding bolt the other side. Slacken off the three 2mm Allen grub bolts. 

Then remove the bolts and gently ease the head apart . Note where the plastic spacers and metal one go. Clean everything up. Grease the mod and insert it , best remove the adjustment bolts first. Then insert the bolts , ensure the rear bolt enters the hole on the rail barrel. Put plenty grease here, metal to metal. Ensure everything is secure , the rail stops and fits exactly into the bed of the mount, easy.

This shows how it works,

Slide the base into the head . Grease on the plates will hold them in position . Ensure the adjusting bit of the head is between the barrel and the front adjustment bolt . Replace the main bolt . Tighten to give no movement if you jiggle the head. Tighten up the retaining nut and snug up the three grub bolts. 

Fix the side plates on , I used a couple extra strips of self adhesive tape.

The stock bolts are soft steel to stop over grauching of their action on the mount head . The rail mod moves the altitude delightfully easily . Use the front bolt just as a stop, it doesn’t need to be overtightened.

There’s a rail mod for the Heq5 mount in the pipeline.

Easy and it actually works. Polar alignment does not have to be spot on for visual observing and alignment . Accuracy here does allow the fov to stay still at high magnifications.

Very pleased to recommend this mod. For those with plenty time and resistance to repetition , there’s a guide on YouTube.

Nick.

Leave a Reply